■
Power Cables
1.1- Low Voltage Cables:
This family includes:
A. Single core cable, solid,
standard or flexible circular copper conductor (CU/PVC). 450
/ 750 Volts - Copper Conductor PVC Insulated
- used for installation in
surface mounted or embedded conduits or similar closed
systems; it is suitable for use in channels with cover, as
well as it is suitable for fixed protected installation in
or on light fittings and inside appliances, switchgear and
control gear, for voltages up to 1000V a.c. or up to 750 V
to earth d.c.
B. PVC insulated flexible cord (NYZ) - 300 / 300 Volts -
PVC Insulated Flexible Cord
Used in dry room for fixed installation where particular
flexibility is required. They can be laid in conduits over
or under the walls as well as steel support brackets. These
are used for light portable appliances such as lamps, TV
sets and table fans.
C. Flat-Twin & Flat-Three Core
Cable (CU/PVC/PVC) 220 / 380 Volts - PVC Insulated PVC
Sheathed, 300/500 Volts - PVC Insulated PVC sheathed Flat
Cables
These cables are used for installation in surface mounted
or embedded
conduits, or similar closed systems.
D. Indoor Multi Core Flexible
Cable-300/300 Volts - PVC Insulated PVC Sheathed Flexible
Cables, 300/500 Volts - PVC Insulated PVC sheathed Flexible
Cables
These cords are used in domestic premises, kitchens,
offices, for household
appliances, including damp situation. They are suitable for
connecting washing
machines, spin extractor, refrigerators, portable lamps,
fans, vacuum cleaners,
TV and household heating and ventilating apparatus, where
the cord can not
be in touch with a surface temperature exceeding 85؛C
E. Multicore Cables, with Stranded
Aluminum Conductors, PVC Insulated and PVC Sheathed 0.6/1
(1.2) kV
Multicore
cables of stranded Aluminum conductors are insulated with
PVC compound rated 70°C, assembled together, covered with
overall jacket of PVC compound. cables are produced
according to IEC 60502.
For outdoor and indoor installations in damp and wet
locations.
F.
Multicore Cables, with Stranded Copper Conductors, PVC
Insulated, Steel Tape Armored and PVC Sheathed 0.6/1 (1.2)
kV
Multicore cables of stranded Copper conductors are insulated
with PVC compound rated 70°C, assembled together, armored
with steel tape and covered with overall jacket of PVC
compound. Cables are produced according to IEC 60502
For outdoor installations in damp and wet locations, where
mechanical damages are expected to occur
G.
Multicore Cables, with Stranded Aluminum Conductors, PVC
Insulated, Steel Tape Armored and PVC Sheathed 0.6/1 (1.2)
kV
Multicore cables of stranded Aluminum conductors are
insulated with PVC compound rated 70°C, assembled together,
armored with steel tape and covered with overall jacket of
PVC compound. Cables are produced according to IEC 60502
For outdoor installations in damp wet locations, where
mechanical damages are expected to occur.
H.
Multicore
Cables, with Stranded Aluminum Conductors, PVC Insulated,
Steel Wire Armored and PVC Sheathed 0.6/1 (1.2) kV
I.
Single
Core Cables, with Stranded Circular Copper Conductors, XLPE
Insulated and PVC Sheathed 0.6/1 (1.2) kV
J.
Multicore
Cables, with Stranded, Copper Conductors, XLPE Insulated and
PVC Sheathed 0.6/1 (1.2) kV
K.
Multicore
Cables, with Stranded, Aluminum Conductors, XLPE Insulated
and PVC Sheathed 0.6/1 (1.2) kV
L.
Multicore
Cables, with Stranded Copper Conductors, XLPE Insulated,
Steel Tape Armored and PVC Sheathed 0.6/1 (1.2) kV
M. Multicore Cables, with Stranded Aluminum Conductors,
XLPE Insulated, Steel Tape Armored
1.2- Medium Voltage Cables
This family includes
-
Single
& Three Cores Aluminum Conductors, XLPE Insulated and
PVC Sheathed 6/10 (12) kV
Stranded circular compacted Aluminum conductor,
semiconducting layer as conductor screen, XLPE insulated,
semiconducting layer as non metallic insulation screen,
Copper tape or wire as metallic insulation screen, three
cores assembled together with non hygroscopic Polypropylene
fillers, wrapped with binder tape and PVC sheathed.
Cables are produced according to IEC 60502 or BS 6622.
These cables are generally suitable for direct burial or for
installation on trays or in ducts.
-
Three
Cores Copper or Aluminum Conductors, XLPE Insulated,
Steel Tape Armored and PVC Sheathed 6/10 (12) kV
Stranded circular compacted Copper or Aluminum
conductor, semiconducting layer as conductor screen, XLPE
insulated, semiconducting layer as non metallic insulation
screen, Copper tape or wire as metallic insulation screen,
three cores assembled together with non hygroscopic
Polypropylene fillers, wrapped with binder tape, covered
with a layer of PVC compound as a bedding, steel wire
armored and PVC sheathed. Cables are produced according to
IEC 60502 or BS 6622.
These cables are generally suitable for direct burial or for
installation on trays or in ducts
-
Three
Cores Copper or Aluminum Conductors, XLPE Insulated,
Steel Wire Armored and PVC Sheathed 6/10 (12) kV
Stranded circular compacted Copper conductor,
semiconducting layer as conductor screen, XLPE insulated,
semiconducting layer as non metallic insulation screen,
Copper tape or wire as metallic insulation screen, three
cores assembled together with non hygroscopic Polypropylene
fillers, wrapped with binder tape and PVC sheathed.
Cables are produced according to IEC 60502 or BS 6622.
These cables are generally suitable for direct burial or for
installation on trays or in ducts
-
Single
& Three Cores Copper Conductors, XLPE Insulated and PVC
Sheathed 8.7/15 (17.5) kV
Stranded circular compacted Copper conductor,
semiconducting layer as conductor screen, XLPE insulated,
semiconducting layer as non metallic insulation screen,
Copper tape or wire as metallic insulation screen, three
cores assembled together with non hygroscopic Polypropylene
fillers, wrapped with binder tape and PVC sheathed. Cables
are produced according to IEC 60502 or BS 6622.
These cables are generally suitable for direct burial or for
installation on trays or in ducts.
-
Single
& Three Cores Aluminum Conductors, XLPE Insulated and
PVC Sheathed 8.7/15 (17.5) kV
Stranded circular compacted Aluminum conductor,
semiconducting layer as conductor screen, XLPE insulated,
semiconducting layer as non metallic insulation screen,
Copper tape or wire as metallic insulation screen, three
cores assembled together with non hygroscopic Polypropylene
fillers, wrapped with binder tape and PVC sheathed. Cables
are produced according to IEC 60502 or BS 6622.
These cables are generally suitable for direct burial or for
installation on trays or in ducts
-
Three
Cores Copper or Aluminum Conductors, XLPE Insulated,
Steel Tape Armored and PVC Sheathed 8.7/15 (17.5) kV
Stranded circular compacted Copper or Aluminum
conductor, semiconducting layer as conductor screen, XLPE
insulated, semiconducting layer as non metallic insulation
screen, Copper tape or wire as metallic insulation screen,
three cores assembled together with non hygroscopic
Polypropylene fillers, wrapped with binder tape, covered
with a layer of PVC compound as a bedding, steel wire
armored and PVC sheathed.
Cables are produced according to IEC 60502 or BS 6622
These cables are generally suitable for direct burial or for
installation on trays or in ducts.
-
Three
Cores Copper or Aluminum XLPE Insulated, Steel Wire
Armored and PVC Sheathed 8.7/15 (17.5) kV
Stranded circular compacted Copper conductor, semiconducting
layer as conductor screen, XLPE insulated, semiconducting
layer as non metallic insulation screen, Copper tape or wire
as metallic insulation screen, three cores assembled
together with non hygroscopic Polypropylene fillers, wrapped
with binder tape and PVC sheathed. Cables are produced
according to IEC 60502 or BS 6622.
These cables are generally suitable for direct burial or for
installation on trays or in ducts.
-
Single
& Three Cores Copper Conductors, XLPE Insulated and PVC
Sheathed 12/20 (24) kV
-
Single
& Three Cores Aluminum Conductors, XLPE Insulated and
PVC Sheathed 12/20 (24) kV
-
Three
Cores Copper or Aluminum Conductors, XLPE Insulated,
Steel Tape Armored and PVC Sheathed 12/20 (24) kV
-
Three
Cores Copper or Aluminum Conductors, XLPE Insulated,
Steel Wire Armored and PVC Sheathed 12/20 (24) kV
-
Single & Three Cores Copper Conductors, XLPE
Insulated and PVC Sheathed 18/30 (36) kV
-
Single
& Three Cores Aluminum Conductors, XLPE Insulated and
PVC Sheathed 18/30 (36) kV
-
Three
Cores Copper or Aluminum Conductors, XLPE Insulated,
Steel Tape Armored and PVC Sheathed 18/30 (36) kV
-
Three
Cores Copper or Aluminum Conductors, XLPE Insulated,
Steel Wire Armored and PVC Sheathed 18/30 (36) kV
-
Single & Three Cores Copper Conductors XLPE Insulated
and PVC Sheathed
1.3- High & Extra high Voltage Cables
a. Single Core Copper Conductor, XLPE insulated, Copper
Wire Screen and HDPE Sheathed 38 / 66 (72.5) kV
Stranded circular or segmantal compacted copper conductor,
semi-conducting layer as conductor screen, XLPE insulated,
semi-conducting layer as non metallic insulation screen,
Semi-conductive water blocking tape, copper wire as metallic
insulation screen to withstand the required earth fault
current, non-conductive water blocking tape
to protect the screen area from longitudinal water
penetration, copolymer aluminum tape to protect the cable
from radial water penetration and HDPE sheathed with
graphite coating or extruded semi-conducting layer. Cables
are designed and tested to comply with IEC 60228, 60840 and
60811
b. Single Core Copper Conductor, XLPE insulated, Copper
Wire Screen and HDPE Sheathed 76 / 132 (145) kV
Stranded circular or segmental compacted copper conductor,
semi-conducting layer as conductor screen, XLPE insulated,
semi-conducting layer as non metallic insulation screen,
Semi-conductive water blocking tape, copper wire as metallic
insulation screen to withstand the required earth fault
current, non-conductive water blocking tape to protect the
screen area from longitudinal water penetration, copolymer
aluminum tape to protect the cable from radial water
penetration and HDPE sheathed with graphite coating or
extruded semi-conducting layer. Cables are designed and
tested to comply with IEC 60228, 60840 and 60811.
c. Single Core Copper Conductor, XLPE insulated, Lead
Sheathed and HDPE Sheathed 76 / 132 (145) kV
Stranded circular or segmental compacted copper conductor,
semi-conducting layer as conductor screen, XLPE insulated,
semi-conducting layer as non metallic insulation screen,
semi conductive water blocking tape to protect the screen
area from longitudinal water penetration, lead sheathed with
suitable thickness to withstand the required earth fault
current and HDPE sheathed with graphite coating or extruded
semi-conducting layer. Cables are designed and tested to
comply with IEC 60228, 60840 and 60811.
d. Single Core Copper Conductor, XLPE insulated, Copper
Wire Screen and HDPE Sheathed 127 / 220 (245) kV
Stranded circular or segmental compacted copper conductor,
semi-conducting layer as conductor screen, XLPE insulated,
semi-conducting layer as non metallic insulation screen,
Semi-conductive water blocking tape, copper wire as metallic
insulation screen to withstand the required earth fault
current, non-conductive water blocking tape to protect the
screen area from longitudinal water penetration, copolymer
aluminum tape to protect the cable from radial water
penetration and HDPE sheathed with graphite coating or
extruded semi-conducting layer. Cables are designed and
tested to comply with IEC 60228, 62067 and 60811.
e. Single Core Copper Conductor, XLPE insulated, Lead
Sheathed and HDPE Sheathed 127 / 220 (245) kV
Stranded circular or segmental compacted copper conductor,
semi-conducting layer as conductor screen, XLPE insulated,
semi-conducting layer as non metallic insulation screen,
semi conductive water blocking tape to protect the screen
area from longitudinal water penetration, lead sheathed with
suitable thickness to withstand the required earth fault
current and HDPE sheathed with graphite coating or extruded
semi-conducting layer. Cables are designed and tested to
comply with IEC 60228, 62067 and 60811.
|