Cable trays are hot
rolled steel sheet to BS:1449
with 2.44m length.
1.1 Cable
trays are divided into two categories:
A - Classic Range:
* Heavy duty (50mm
height return flange)
* Medium duty (35mm
height return flange)
* Medium duty (25mm
height return flange)
* Straight flange cable
tray.
B-
Esteem range
Where the height of the
return flange, the thickness and the design of
accessories are different from the classic 1 range, and
divided as followed:
B.1- Return Flange cable
trays with following specifications:
1.
Flange height: 25, 35, 50, 60, 85
&110mm.
2.
Flange type: Inside or outside (unless otherwise
requested by customer inside return flange will
be supplied as KSC standard).
3.
Material: Hot rolled steel sheet to BS 1449.
4.
Standard length:
2.44 or 3 Mtr
5. Finishes:
A. Pre-galvanized to BS
2989.
B.
Hot dip galvanized after fabrication to BS729.
C. Epoxy
coating
D.
PVC coating
E.Stainless
steel.
B.2- Straight flange cable
tray.
1.2 Cable
Trays Finishes:
1. Pre
Galvanized (Mill galvanized) to BS 2989.
2. Hot dip
galvanized after fabrication to BS 729.
3. Epoxy
Coating
4. PVC
Coating.
5. Stainless
steel.
1.3 Cable
Trays Accessories:
1-
90 deg flat bend, available with 30,45 & 60 deg and with
different sizes of B & W as in below drawing:
2-
Equal & unequal tee with different sizes for W,B & C as
in drawing
3-
Equal four way cross with
different sizes for W,B & C as in drawing.
4-
90deg Internal Risers
Available in 30, 45 & 60 Deg
with different width sizes as in drawing.
5-
90deg External Risers Available in 30, 45 & 60 Deg
with different width sizes as in drawing.
6-
Reducers with
different width sizes for in & out as in drawing.
7-
Covers & Couplers
Covers are available in both closed and ventilated
designs. Both designs protect cable installations from
mechanical damage, heavy accumulations of dust and
direct sunlight. The ventilated design allows air to
circulate around cables.
